AI Translator
Instant translation powered by Google Neural
P0123 Code – Throttle Position Sensor (TPS) Circuit High Input | Complete OBD-II Diagnostic Guide
Introduction
P0123 is a generic OBD-II Diagnostic Trouble Code (DTC) that stands for:
P0123 – Throttle Position Sensor (TPS) "A" Circuit High Input
This code indicates that the Engine Control Unit (ECU) has detected a voltage signal from the Throttle Position Sensor (TPS) that is higher than the manufacturer's specified range.
The TPS is a critical sensor that tells the ECU how far the throttle plate is open. The ECU uses this information to control fuel injection, ignition timing, transmission shifting, and engine performance.
When the P0123 code appears, the Check Engine Light will usually illuminate and the vehicle may enter limp mode.
What is a Throttle Position Sensor (TPS)?
The Throttle Position Sensor is mounted on:
Throttle Body
Electronic Throttle Assembly
Its job is to measure:
Throttle plate angle
Accelerator demand
Engine load
The TPS sends a voltage signal to the ECU.
Typical voltage:
Closed Throttle
0.4V – 0.9V
Wide Open Throttle
4.0V – 4.8V
When voltage exceeds the expected range, the ECU stores code P0123.
P0123 Meaning in English
The ECU detects a higher-than-normal voltage signal from the TPS circuit.
This may indicate:
Faulty TPS
Short circuit to power
Wiring damage
Throttle body problems
P0123 Meaning in Hindi
P0123 ka matlab hai ki Throttle Position Sensor ECU ko normal se zyada voltage signal bhej raha hai.
Is wajah se ECU throttle position ko galat read karta hai aur Check Engine Light ON ho sakti hai.
P0123 Meaning in Urdu
P0123 ka matlab hai ke Throttle Position Sensor ECU ko had se zyada voltage signal bhej raha hai.
ECU throttle ki position ko sahi tarah samajh nahi pata aur engine performance mutasir ho sakti hai.
Common Symptoms of P0123
Check Engine Light ON
Sabse common symptom.
Poor Acceleration
Vehicle sluggish ho sakti hai.
Engine Hesitation
Accelerator dabane par delay mehsoos hota hai.
High Idle Speed
Engine RPM normal se zyada ho sakta hai.
Rough Running
Engine smoothly operate nahi karta.
Limp Mode Activated
Kai modern vehicles safety mode mein chale jate hain.
Transmission Shifting Problems
Automatic transmission gear changes affect ho sakte hain.
Reduced Fuel Economy
Fuel consumption barh sakti hai.
Common Causes of P0123
Faulty Throttle Position Sensor
Sabse common cause.
Short Circuit to Battery Voltage
TPS signal wire power se short ho sakti hai.
Damaged Wiring Harness
Broken ya melted wires.
Corroded Connector
Poor electrical connection.
Faulty Electronic Throttle Body
Internal sensor failure.
ECU Problems
Rare but possible.
Vehicles Commonly Affected
Toyota
Corolla
Innova
Fortuner
Camry
Honda
City
Civic
Amaze
Hyundai
i20
Creta
Verna
Kia
Sonet
Seltos
Nissan
Sunny
Micra
Magnite
Maruti Suzuki
Swift
WagonR
Baleno
Volkswagen
Polo
Vento
Ameo
Virtus
Ford
EcoSport
Figo
BMW
3 Series
X1
Mercedes-Benz
C-Class
E-Class
How to Diagnose P0123
Step 1
Connect an OBD-II Scanner.
Read stored codes.
Step 2
Inspect TPS Connector.
Check for:
Loose terminals
Corrosion
Water ingress
Step 3
Check Live Data.
Monitor TPS percentage.
Normal:
Idle: 0–10%
Wide Open Throttle: 90–100%
Step 4
Measure TPS Voltage.
Closed throttle:
0.4V–0.9V
Open throttle:
4.0V–4.8V
If voltage remains excessively high:
TPS or wiring is faulty.
Step 5
Inspect Wiring Harness.
Check for:
Short circuits
Open circuits
Damaged insulation
How to Fix P0123
Clean TPS Connector
Remove corrosion.
Repair Wiring
Fix damaged wires.
Replace TPS Sensor
If testing confirms failure.
Replace Throttle Body
If TPS is integrated into throttle body.
Clear DTC Codes
After repair:
Clear codes
Perform road test
Related Trouble Codes
| Code | Description |
|---|---|
| P0120 | TPS Circuit Malfunction |
| P0121 | TPS Range/Performance |
| P0122 | TPS Circuit Low Input |
| P0123 | TPS Circuit High Input |
| P0124 | TPS Intermittent Signal |
Can You Drive with P0123?
Possible for short distances.
However:
⚠ Reduced engine performance
⚠ Poor fuel economy
⚠ Limp mode activation
⚠ Unstable acceleration
Vehicle should be repaired as soon as possible.
Prevention Tips
Inspect throttle body regularly.
Keep connectors clean.
Avoid water intrusion.
Repair damaged wiring immediately.
Use OEM-quality sensors.
Conclusion
P0123 – Throttle Position Sensor (TPS) Circuit High Input indicates that the ECU is receiving an excessively high voltage signal from the throttle position sensor circuit. Common causes include a faulty TPS, damaged wiring, corroded connectors, short circuits, or throttle body issues. Proper diagnosis using a scan tool and multimeter can accurately identify the fault and restore normal engine performance.
WHAT THE P0123 CODE MEANS.HINDI URDU P0123 is the OBD code for P0123 code. Learn what does P0123 Throttle Position Sensor Switch. A. Circuit High Input means Throttle Position Sensor Circuit High Voltage. Agar ye code aata hai To Pahle Throttle Position Sensor saaf kar ke dekhe 1 Bar or code reset karke dikhao nahi to fir ye sensor ko Badlna padega (TPS) A Circuit High Input What the,P0123 Code, Throttle Position Sensor High Input, TPS Circuit High Voltage, P0123 Meaning, P0123 Toyota, P0123 Honda, P0123 Hyundai, P0123 Volkswagen, TPS Sensor Fault, Check Engine Light P0123, Throttle Body Sensor Problem, OBD2 Code P0123.


0 Comments
please do not enter Any spam words link in the comment box..